Selecting Metal Alloy Electric Contact Materials for MEMS Switches

This paper presents a method for selecting metal alloys as the electric contact materials for microelectromechanical systems (MEMS) metal contact switches. This procedure consists of reviewing macro-switch lessons learned, utilizing equilibrium binary alloy phase diagrams, obtaining thin film material properties and, based on a suitable model, predicting contact resistance performance. After determining a candidate alloy material, MEMS switches were designed, fabricated and tested to validate the alloy selection methodology. Minimum average contact resistance values of 1.17 and 1.87 Ω were measured for micro-switches with gold (Au) and gold–platinum (Au–(6.3%)Pt) alloy electric contacts, respectively. In addition, \u27hot-switched\u27 life cycle test results of 1.02 × 108 and 2.70 × 108 cycles were collected for micro-switches with Au and Au–(6.3%)Pt contacts, respectively. These results indicate increased wear with a small increase in contact resistance for MEMS switches with metal alloy electric contacts

Spin Foam Models of Matter Coupled to Gravity

We construct a class of spin foam models describing matter coupled to gravity, such that the gravitational sector is described by the unitary irreducible representations of the appropriate symmetry group, while the matter sector is described by the finite-dimensional irreducible representations of that group. The corresponding spin foam amplitudes in the four-dimensional gravity case are expressed in terms of the spin network amplitudes for pentagrams with additional external and internal matter edges. We also give a quantum field theory formulation of the model, where the matter degrees of freedom are described by spin network fields carrying the indices from the appropriate group representation. In the non-topological Lorentzian gravity case, we argue that the matter representations should be appropriate SO(3) or SO(2) representations contained in a given Lorentz matter representation, depending on whether one wants to describe a massive or a massless matter field. The corresponding spin network amplitudes are given as multiple integrals of propagators which are matrix spherical functions.Comment: 30 pages, 9 figures, further remarks and references added. Version to appear in Class. Quant. Gra

Selective formation of copper nanoparticles from acid mine drainage using nanoscale zerovalent iron particles

Nanoscale zerovalent iron (nZVI) has been investigated for the selective formation of Cu nanoparticles from acid mine drainage (AMD) taken from a legacy mine site in the UK. Batch experiments were conducted containing unbuffered (pH 2.67 at t=0) and pH buffered (pH 99.9% removal of all metals within 1 h when nZVI ≥1.0 g/L) from unbuffered AMD despite the coexistent of numerous other metals in the AMD, namely: Na, Ca, Mg, K, Mn and Zn. An acidic pH buffer enabled similarly high Cu removal but maximum removal of only <1.5% and <0.5% Cd and Al respectively. HRTEM-EDS confirmed the formation of discrete spherical nanoparticles comprised of up to 68% wt. Cu, with a relatively narrow size distribution (typically 20-100 nm diameter). XPS confirmed such nanoparticles as containing Cu0 , with the Cu removal mechanism therefore likely via cementation with Fe0 . Overall the results demonstrate nZVI as effective for the one-pot and selective formation of Cu0 -bearing nanoparticles from acidic wastewater, with the technique therefore potentially highly useful for the selective upcycling of dissolved Cu in wastewater into high value nanomaterials

Sorption and fractionation of rare earth element ions onto nanoscale zerovalent iron particles

The removal behaviour of rare earth element (REE), (Sc, Y, La-Lu), ions onto nanoscale zerovalent iron (nZVI) particles has been investigated. Batch sorption isotherms were conducted using REE-bearing acid mine drainage (AMD) and a range of different synthetic REE solutions, which were exposed to nZVI at 0.1-4.0 g/L. Maximum adsorption capacity of Yb and La was 410 and 61 mg/g respectively (1000 mg/L LaCl3 and YbCl3 starting concentration, initial pH=4.5, T=294 K), the highest currently reported in the literature. Aqueous REE removal to ultratrace concentrations (99.9% removal) was also recorded after 30 min (the first sampling interval) exposure of ≥0.5 g/L nZVI to 10 mg/L aqueous REE solutions (nitrate counterion). Similar rapidity and near-total removal ability was recorded for the exposure of nZVI to the AMD, however, a greater nZVI concentration was required, with the removal of all REEs (with the exception of La, Ce, Nd and Gd) to <1 µg/L when exposed to nZVI at 4.0g/L for 30 mins. In all systems nZVI was selective for the removal of HREE ions in preference to LREE ions, with the mechanism determined using HRTEM-EDS and XPS analysis as via surface mediated precipitation. Overall the results demonstrate nZVI as exhibiting great promise as an effective and versatile agent for simultaneous REE ion recovery and fractionation

State-of-the-art survey of dissimilar metal joining by solid state welding

State-of-the-art of dissimilar metal joining by solid state diffusion bonding and roll and press welding, emphasizing stainless steel and aluminum allo

Towards 'Precision Mining' of wastewater: Selective recovery of Cu from acid mine drainage onto diatomite supported nanoscale zerovalent iron particles

This paper introduces the concept of ‘Precision Mining’ of metals which can be defined as a process for the selective in situ uptake of a metal from a material or media, with subsequent retrieval and recovery of the target metal. In order to demonstrate this concept nanoscale zerovalent iron (nZVI) was loaded onto diatomaceous earth (DE) and tested for the selective uptake of Cu from acid mine drainage (AMD) and subsequent release. Batch experiments were conducted using the AMD and nZVI-DE at 4.0–16.0 g/L. Results demonstrate nZVI-DE as highly selective for Cu removal with >99% uptake recorded after 0.25 h when using nZVI-DE concentrations ≥12.0 g/L, despite appreciable concentrations of numerous other metals in the AMD, namely: Co, Ni, Mn and Zn. Cu uptake was maintained in excess of 4 and 24 h when using nZVI-DE concentrations of 12.0 and 16.0 g/L respectively. Near-total Cu release from the nZVI-DE was then recorded and attributed to the depletion of the nZVI component and the subsequent Eh, DO and pH recovery. This novel Cu uptake and release mechanism, once appropriately engineered, holds great promise as a novel ‘Precision Mining’ process for the rapid and selective Cu recovery from acidic wastewater, process effluents and leach liquors

Can Bundled Discounting Increase Consumer Prices Without Excluding Rivals?

Since we abhor suspense, we will quickly answer the question our title poses: No. As a general matter, bundled discounting schemes lower prices to consumers unless they are predatory—that is to say, unless they exclude rivals and thereby permit the bundled discounter to price free of competitive restraint. The corollary of this observation is that bundled discounting is generally pro-competitive and pro-consumer and should only be condemned when it is capable of excluding rivals. We pose and answer this question because it is at the heart of Section VI of Professor Elhauge’s provocative draft article which is the subject of this symposium. In Section VI, Professor Elhauge argues that bundled discounting can have “power effects” identical to conventional tying arrangements irrespective of any exclusionary effect on rivals as well as that cost/revenue tests for bundled discounting perversely immunize the worst bundled discounting schemes—those that represent the highest non-exclusionary price increases to consumers